DURAN® AR Measuring pipette, 2 ml, for partial outflow, class B
Capacity - ml |
2
|
Height (h) - mm |
360
|
Accuracy limits - ml |
0.0015
|
Graduation - ml |
0.02
|
Material |
Glas
|
Colour |
Helder
|
Color code DIN 12621 |
DIN 12621 : 3 x wit
|
- Numbering from the top down. Calibration is based on the poured out volume (“Ex”) at a +20 °C reference temperature. Due to the scale, variable volumes can be held and then dispensed in the same or differing increments.
|
- Typical applications: accurate measurement and decanting of liquids.
|
- DURAN® volumetric products have closely calibrated scales that permit very accurate determination and measurement of volumes. DURAN® products are available in two accuracy classes: class A/AS and class B. The two classes differ in the accuracy of measurement with class A being the highest accuracy class and class B being approximately half that of class A. Class AS has the same tolerances as class A, but is designed to permit more rapid outflow.
|
- To ensure a long service life for your volumetric glassware and to exclude possible volume changes, these products should not be heated above +180 °C in drying cabinets or sterilisers.
|
- Never heat volumetric glassware on a hot plate.
|
- Always heat up and cool down volumetric glassware gradually, to avoid thermal stresses and thus any possible breakage of the glass.
|